On 7/19/2019 at 10:44 PM, Guest Sam said:

Does not work getting Failed to verify whole-file signature

try re-downloading the firmware here

53 minutes ago, Guest Kiran said:

Yes Im also getting the same error and the box is non working condition for last 5 days now.

try redownloading from this thread. XPL3900 / XPL3000 share same firmware but it sounds like the XPL3000 version is corrupted.

7 hours ago, Guest arun said:

Any updates on this issue? Stuck with no TV or solution for 4 days. 

Paid service. Hence it is reasonable to expect a prompt response.

Hello, 

files were provided promptly. try re-downloading the file here , XPL3900 file is same as XPL3000 however the file could be corrupted when downloading originally.

16 hours ago, Jean-Luc said:

Thank you

Does my USB key need to be in fat32

I got in the recovery mode one time and never after that

And didn't see or read the recovery file

 

 

 

try formatting your USB key and transferring the file again.

15 hours ago, Guest Babajeee said:

Anyone have a fix for buzz3000 1gb ?

 

thank you 

XPL3000 Basic (1GB) uses the same firmware as XPL3000.  So the method on this thread will work on your box.

However we recommend for XPL3000 Basic (1GB) to use Android 6 downgrade for better performance. This can be done by mailing the box or dropping it off at our location www.buzztv.com/rma 

please go here to fix the problem

this method works 100% of the time. please retry all the steps again. is your box XPL 3000 with Android 7? if you get an error message please post a photo of it.

thank you

13 minutes ago, Guest Ver said:

I tried this. After the install and reboot it it is still going back to the boot menu.

Is it something to do with what I tried yesterday after the issue? Tried clearing partition and cache options; is that something to do with it? 

try formatting your micro sd card , put the firmware back on the card. re-try the steps again. if you clear partitions you will erase everything off your box .if its continue to go back to boot menu it means you missing a step. If you continue to have problems please send back or drop off at our warehouse www.buzztv.com/rma

Thank You!

2 hours ago, Jean-Luc said:

I don't see any reset hole in the back of the unit

reset hole is in the AV port.

ATTENTION: This fix ONLY works on 2018 Edition (Android 7) versions of XPL 3000. 

1. Download the file onto a computer
Then transfer it onto a USB drive or SD card
Then insert into box

2. Use reset hole on the back of your 3000 to get into recovery mode on first time boot. 

You will need to use a Tooth Pick or Paper Clip or something similar to do this.

3. 
Once in recovery
Go to 
Apply update from ext

Select Udisk which is USBDrive or SD Card depending on which one you have the Firmware on

4.Highlight the Firmware
Press Ok to install it

It will take up to 8 mins to install

5. Once finished 
Select reboot

6. It will boot back into Android and everything is normal and nothing is erased

Please go here  http://stbtalk.com/index.php?/topic/10-stuck-in-recovery-or-boot-fix/ 

1. Download the file onto a computer
Then transfer it onto a USB drive or SD card
Then insert into box

2. Use reset button inside AV hole on the back of your 3900 to get into recovery mode on first time boot. 

You will need to use a Tooth Pick or Paper Clip or something similar to do this.

3. 
Once in recovery
Go to 
Apply update from ext

Select Udisk which is USBDrive or SD Card depending on which one you have the Firmware on

4.Highlight the Firmware
Press Ok to install it

It will take up to 8 mins to install

5. Once finished 
Select reboot

6. It will boot back into Android and everything is normal and nothing is erased

update_GTA_BUZZ_TV_ATV3900_7.1_STUCK-BOOT-FIX.img

Disclaimer: This file is sole made for XPL3900 bootup issue. Using this file for any other model will void your warranty.

Factory Reset

Create Shortcut To Main Screen

Step by step Video Guide,