nbs.

Male end of a toothpick?

Might be an issue with the update server You'll have to wait for allaboutbuzz to verify

not a lot of difference ,its mostly to do with subtitles and a few other features

If you have tried different cables and it's still doing it I would suggest a hard reset

Get yourself a micro sd card 256 g for under 20 bucks

Turn system sounds on.

have you sent buzz your serial number?

at the top of the chat box you will see <> If you paste your link inside it it will appear like this and not be live https://www.amazon.co.uk/UGREEN-Ethernet-1000Mbps-Compatible-Nintendo/dp/B00MYTSN18/?_encoding=UTF8&pd_rd_w=h1eyr&pf_rd_p=86d8f8c7-df4d-4904-b94b-da842b2d456b&pf_rd_r=H35P6FAHJ6M2CWJEK72E&pd_rd_r=64f6c318-89e2-4e10-a067-2b14ddeb6901&pd_rd_wg=wa8xG&ref_=pd_gw_cr_cartx

you should code your links

If you had read the thread you would know there is an issue with some of the vidstick If your stick was part of that batch there is a delay Allaboutbuzz can confirm

did you format your drive?

you need to pm alboutbuzz with your info to figure out the issue

If that was the case no one could record without issues More likely a buzz/server issue

You have one more step you can try and that's a pin reset

I would consider doing a factory set

that can happen

have you rebooted your network?

never used or changed the buffer since i got the 4500

you hit ok and check the one you want

no, just make sure you are on default I have scheduled while recording from guide and manual scheduling many times no issues

I just did two recordings one on default and one on secondary player the default is fine the secondary player is out of sync

I also should ask if you formatted the drive

when watching tv full screen hit the menu on remote.configuration.video player

You are leaving the buzz unit on? Did you find where the media players were?

There are media players under menu configuration player Are you doing scheduled recording or recording from guide?