Ryu

yup, got it. but looks nice though.

love it. while watching live and in category pressing right arrow does not take to guide.

do have anything (external devices) else attached to the box? if yes then disconnect and try again. if no then disconnect everything including HDMI and try to turn ON and see what happens. also, try a different power outlet in the house if possible. any light indicating that its receiving power? more info is always helpful and always provide anything you have done to troubleshoot.

I have attempted nearly every solution until it became quite frustrating. The primary reason this issue has caused me concern is that the P6 is my favorite device, and I am highly attached to it, unwilling to risk any damage to it. To troubleshoot, I followed your recommendations and determined that IR interference was not the cause in my case. Consequently, I considered the possibility of interference from other devices within my home. I turned off all devices except for the P6, which did not wake up on its own. Over several days, I powered ON one device at a time until my X5 SS was turned ON, at which point the issue recurred. Subsequently, I reversed the process by turning off all devices again; after a few days without incident, I powered on the X5 SS first, and the problem reappeared. This leads me to conclude that the issue is due to interference rather than a malfunction of my device, which is a significant relief.

looks like bluetooth interference. do you have any other buzz box in your house? if not check any other bluetooth device and try to turn off and see what happens. my x5 SS wakes my p6 on like yours.

contact your provider and check the status of the server.

server probably having issues

I would say contact buzz support team and you may have to send them to take a look.

have you tried wipe cache partition first before factory reset?

no shutdown yet

do you have E5?

usb stick, flash drive, or external drive.

are you using hdmi came with the box? have you tried your device on different tv?

check to make sure there's no typo error in username/password. also try url with /c or without /c

using Mac or xc api?

try to post in the section for your model

if it still under warranty then contact support.

ok cool.

any external storage device connected? try to factory reset and see if that helps.

How to Re-Pair the ARQ-200 Series dongle: i. Press and hold OK + TV Power buttons for 4 seconds ii. Let go of both buttons & a red light will be blinking at the top of the remote iii. Hookup the USB dongle to your BuzzTV Device. iv. You should be paired after this General steps for color button programming: There are 4-colour buttons which can be programmed to control shortcuts within the BuzzTV Device i. Find and open the settings from the Home screen ii. Next click BuzzTV Utilities iii. Then Choose Remote control iv. You will be able to set your colour button shortcuts from this menu