-
Posts
53 -
Joined
-
Days Won
1
Posts posted by PapaS
-
-
Also have "0"
-
3 minutes ago, Flyinghigh said:
Does it have to be?
Would be nice to see my local weather, since the feature is there. I, like many others, run my VPN all the time. Does me no good to see another city or country.
One solution @Flyinghigh is to use wolf launcher and install a weatherwidget. I know this isn't a real solution but I like my weather on my home screen too so that works for me.
- 1
-
On 7/4/2022 at 7:41 PM, Emporium said:
Same here.. Just tested it.
Power off from X5 remote is a proper power off (since I have powerkey definition set that way).
But if I turn off my monitor (which is where the X5 is presently connected), about 5 seconds later, the light in front of the X5 goes RED. Turn on monitor and before monitor even has time to turn LCD on, the X5 is already powered up, led is blue, and image is ready. So it obviously goes into suspend. I checked and under CEC control, I have CEC Switch enabled, and the Device auto power off is also enabled (but it does not power off, it goes to suspend.
For me it does not bother me one way or another. I usually do a full power off out of habit from ages ago, since there were funny behavior over time. I have not tried the X5 long enough using suspend to see if there are still strange behaviors after a while. I always assumed it was due to all sorts of strange states, memory leaks and other unexpected states, but I guess time will tell. Guess "if" it is an option maybe they can add a dropdown/submenu to the "Device auto power off", so we can select "disable, power off, or suspend".
@PapaS you say you have 2 options, shutdown and restart. I am assuming you are referring to the options if you LONG press the power button on the remote. If you just quickly hit the power key on the remote, it will just do whatever is defined under the "Settings->More Settings->Powerkey Definition" There you have option for suspend, force suspend, shutdown and restart. Not sure what the difference is between suspend and force suspend however.
@emporium I was without internet since Sunday due to squirrels chewing my optic fiber cable to pieces so sorry for not responding sooner. I did only have two options but after the update a week ago all four started showing again so it was all good.
-
3 minutes ago, dishuser said:
mine took less
look at the pic above to see what took 2½ hours
I didn't have the same problem. The 4 minutes included that part too.
- 1
-
My update with vpn on took less than 4 minutes to complete. Buzz tv rocks!
-
I guess I'll pass the great news on and big thumbs up to the buzztv developers. I just installed the new update and it is flawless for me. On top of that even though it's not in the release note, the 4 powerkey definition settings have been fixed suspend, force suspend, shutdown and restart are all back.
- 1
-
7 minutes ago, dishuser said:
isn't listed in release note
It wasn't in the release note in the previous update that they were going to go missing either so I didn't think it would hurt to ask.
-
Does anybody know if the missing options in the power key definition settings has been fixed with this new update?
-
Like @Tatosaid, double please.
-
2 minutes ago, nbs. said:
The suspend option is missing
Thanks for your response
-
3 minutes ago, nbs. said:
Whe it is set to shutdown that is what the box does Suspend is the setting that takes it to homescreen right away
In my opinion setting it to shutdown is better for the box
Thanks again. In my settings I have 2 options. First 1 is "shutdown" and the 2nd is "restart" I don't have one that says "suspend"
-
28 minutes ago, nbs. said:
Hit the menu button ,settings ,config,and turn on start live yv on boot See if it'll go there
@nbs.Thanks, I tried this and hoped for the best but still powers on by first rebooting then the homepage popped on briefly before the buzzlive tv app opened on its own.
-
Thanks @dishuserfor pointing that out. Like I said I'm new to all this.
-
Two posts above @nbs.replied, "Reset your box"
-
Reset the box? That's easy for people that know how to backup and save all their data. But if you're like me being new to all this, I just spent 2 weeks loading this box with a whole lot of stuff. Starting from scratch would be terrible.
-
Not sure how to do that. For the past 2 weeks its just went straight to homescreen when I turned it on instead of restarting and then going to homescreen. If you could tell me where to go in settings to change this it would be greatly appreciated @nbs.
-
@nbs. I can get to those settings and it's set to "shutdown." If I set it to "restart" my TV and receiver powers off but the blue light on the x5 stays lit up so I'm thinking it's not powering off. If I leave the power key definition set to "shutdown" my TV, receiver and box all turn off properly. The problem is when I try to power back on, instead of the x5 starting on the homepage it starts by restarting the box (reboot). It does restart properly after rebooting I can use the box but I'm just wondering why it doesn't power on to homepage anymore. Thanks for your response @nbs.
- 1
-
Since the latest firmware update every time I power on my x5 starts in rebooting mode instead of staring on homescreen. How do I fix this?
-
After update last night nothing but headaches. Box has run perfect for 2 weeks, now same as somebody else mentioned every time I power on the box it starts in rebooting mode. Power key definition is set same as before. Also box keeps disconnecting from wifi for no apparent reason. My wifi is working properly.
- 1
-
Mine is opposite also. @BeachBum
-
Thanks @dishuser. I did try this about a week ago and it didn't work, but I'm not sure if it was on homescreen or not but after your post I checked while on homescreen and indeed it does work. Thanks again!
- 2
-
Have the exact same problem.
-
I can't find any other weather settings besides the choice of Celsius or Fahrenheit, but nothing for location.
- 1
-
Thanks a lot @nbs.I was just curious as I run vpn all the time. Hopefully someone at buzztv could change this in a future update.
Vidstick Max
in VidStick / VidStick + / VidStick MAX
Posted
This may be related to the latest version of analti. Alot of people talking about this on another streaming forum. You might want to try a different speedtest app or use older version of analti. Hope this helps, good luck