Mark7

Nice, I need a few of those, please

Disconnect the Ethernet cable to your Buzz Box as well. It will work better. Mark7

Okay, all of my Buzz products, including customers IP providers, wired ethernet, has measured average 90 Mbs. I have Starlink with 200Mbs, wired 90 Mbs, through DLink Fast switch, Cat 7 for the router. On the P6, and everything else, 7 boxes.... On Wireless StarLink G5 Wireless, connection P6, 200 Mbs. All of my Buzz Boxes never went above 90 Mb, in any connection, or country, or IP provider Feed. I have a customer that has 900 mbs measured by Anlaiti, WiFi, ethernet wired, 90 Mbs. Hope this helps, Its not your IP provider. I travel a lot, and test these boxes everywhere. Thank you, Mark7

Yes, there is a fix in the works. Thank you for your help. Mark7

Sorry, I did not think that would be a problem.

Hi razor07 can you show us a picture or a screen shot?

Yes, I will be at Buzz HQ next week. Love the P6, but understand programming issues. Thanks everyone for you help. Still have 2 Killer XRS4900 MAX as back up. And a U5

Okay, the MAC server is working on Buzz6, but I had to disconnect the power to the P6 for it to work properly. Not sure what caused that, but P6 with Buzz6, 3 XC servers, and 1 MAC is now working. Thanks

Okay, all 3 XC servers came back on line, after Deleting them all, and the Cache. Reloaded, and now they are all working. Now, trying the MAC server, on Buzz6 Will let you know how it goes. Thank you, everyone for your help

Okay, that took a while, Deleting took 2 minutes for each XC Server. Cleared Cache on Buzz6. Cache was at 660mb. Put first URL in, and it connected, no changes in URL address. Now for the 4 other servers. I did load 1 server into Buzz5 and it worked perfectly. Will update after loading the rest of the servers, including the MAC server. Thanks Ryu

Okay, will do. I'll let you know in a few minutes

Okay, tried /c on all 3 different XC Servers on Buzz6, still doesn't work. Thanks for the suggestion.

I know it was working on the Labour Day weekend...

3 different portals, none with /c at the end of the URL Thanks

Okay, Thank you.

Just noticed it today, Football Sunday

Hi guys, just noticed my P6 Buzz6 not loading (3) XC Servers. Channel Stream Error. And the Guide defaults to True 4k Bloomberg channel. Does not matter what XC server is selected. It does load a MAC Server (1) on P6 Buzz6. My XRS4900 loads all the same XC servers properly. Any ideas why? Thanks, Mark7

I was able to brighten the picture up: Settings-Device Preferences-Display&Sound-HDR-HDR Mode-Vivid Max Brightness-1200

Hi everyone, the Hard Start seems to have fixed the Freezing problem. Thank you everyone for the support. Side note: the server info did have to be reloaded. Fully expecting that. Mark7

No, what is the procedure for that? I assume all server info, and settings, will be erased, correct? Thanks, Mark7

Okay, both boxes have adequate air flow, not Hot. Switched installations, same box, same freezing, so not HDMI, Power supply, Internet provider, or server,,, Will swap it out, and bring it to Buzz next week. Thanks everyone for your help. Mark7

Okay, swapped power supplies, same problem. Going to try swapping the box locations, might be HDMI cable related? It's on a custom built media center. Thanks, Mark7

Trying power supplies right now. Also, the remote is unresponsive when it freezes. Thanks, Mark7

Hi everyone, hope all is well. I have 2 Classics in the same house, same internet provider, power conditioned, same server, and 1 is freezing after a few hours of being ON. If it is unplugged for a few minutes, and restarted, it is fine for a few hours, then it freezes again. Any ideas? Thanks for the support Mark7 IMG_68101.3gp

Okay Ryu, I will try rebooting the U5. That makes the most sense. Thank you, Mark7