Ryu Posted July 31 Posted July 31 Hello, I am encountering a somewhat unusual situation. While it is not a major issue, I thought it prudent to report it in case others have experienced the same. I have all my devices positioned close to each other, approximately one foot apart. No device other than the X5 SS appears to be causing my P6 to power on unexpectedly. I observed that when I disconnect the power from my X5 SS, the P6 remains in standby mode with a red light. However, if I connect the X5 SS and leave both devices in standby mode, the P6 intermittently powers on with a green light for no apparent reason. I have removed other devices and repositioned them without any issues; the interference occurs only when the X5 SS is plugged in, causing the P6 to activate without any remote control interaction. Thank you. Quote
dishuser Posted July 31 Posted July 31 I only have had one box at a time with power hooked up about 5-6 years ago I didn't and had to do a reset on the box I wasn't using because it was taking commands from the remote at neighbourhood bar they have 4 boxes hooked up and have 3 of them covered with a cardboard shell so IR won't work on those 3 1 Quote
Ryu Posted July 31 Author Posted July 31 I usually keep them OFF too but some times for testing im keeping them ON so thats where I ended up finding wired behavior. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.