NsC0001 Posted February 6 Posted February 6 Hi my box was in storage for a while as I was remodelling the house. I now have my system setup again but noticed the display setting are lost each time I start up. I have tried changing the hdmi cable but change. Any help would be appreciated. thnaks Neil Quote
Ryu Posted February 6 Posted February 6 should post in 4900 section. what display seating are you talking about, display and sound, hdmi-cec, and power, screen position? need some more information. what app version do you have? post some info. 2 Quote
NsC0001 Posted February 6 Author Posted February 6 Hi you can select resolution in settings then display. But my system defaults back to a low resolution after a power down Quote
NsC0001 Posted February 6 Author Posted February 6 Yes I tried that but is does the same. After power down it goes to 480 then inhale to switch it back to 1080 toggling the auto switch Quote
NsC0001 Posted February 6 Author Posted February 6 Yes I’ve just done a backup so will try reset 1 Quote
dishuser Posted February 6 Posted February 6 4 hours ago, NsC0001 said: Yes I’ve just done a backup so will try reset did you transfer the backup with a file manager? 1 Quote
NsC0001 Posted February 6 Author Posted February 6 No I used the backup option in config. i then selected internal memory and did the reset So lost it all with the reset. The rest didn’t help as I still have the same issue. Quote
Ryu Posted February 6 Posted February 6 try turn off CEC settings if you have them ON and then see what happens Quote
Ryu Posted February 6 Posted February 6 what settings is your TV set to? also what brand is your tv is? Quote
NsC0001 Posted February 6 Author Posted February 6 Its a Samsung 7 series (58)lcd Anynet+ is set to on as I also have a Samsung soundbar Quote
dishuser Posted February 6 Posted February 6 55 minutes ago, NsC0001 said: No I used the backup option in config. i then selected internal memory and did the reset So lost it all with the reset. The rest didn’t help as I still have the same issue. you have to transfer from internal to stick then reset Quote
Ryu Posted February 6 Posted February 6 try to turn on cec on your box and turn virtual switch off then try. I had one time similar issue with 4900 and Samsung 5 series and I turned off virtual switch fixed me issues. you can try that as well let us know Quote
NsC0001 Posted February 8 Author Posted February 8 Thanks for helping. its something to do with my Samsung tv. I switch to hdmi port 2 and that fixed it. Can’t find anything in tv settings that would do this, but it working now 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.