tvlarry

Update: Hard reset did not correct the "no power on using IR or Bluetooth in AM after using "suspend" prior night to turn off" So after Not Using "suspend" change to "Power Down" & "Power On" seems this is a bypass of the issue. I did try the units on another TV to see if it was the CEC signal causing it not to come out of "suspend", and no difference. Sometimes next day, stuck in red LED state, with no "wake from suspend" The Hard reset may have corrected the unit from disconnecting from WIFI after using "suspend" and getting the unit to power on next day to find there is no internet connected, only WIFI "saved"

Reset performed, time will tell. Thanks for suggestions

got it

XRS4500 older unit video shows, is the procedure the same for X5 ?

ok thanks will try it

Not sue Emporium, I am having issue with both units so lets see what they recommend

Thanks for responding Buzz wants to see the units, so I am shipping them back. I provided photos and they would like to reproduce the issues.

I do not see a way to actually "shut off" bluetooth, so I unpaired the remotes. Now that I am using IR and set power to "standby" the Blue LED stays on in "standby" When remotes were paired with bluetooth, and powere was set to "standby" the blue power LED changed to red. So turning off bluetooth should not have any bearing on the power LED in "standby" indicating there is now a different function controlling "standby" On other models this is not the csse. Bluetooth ON, power to "standby" when activated, power LED goes red. I will try iin this config to see if the dropping WIFI is also corrected. thanks

I will try that now and let you know. Turn off Bluetooth...

Thank you, did not know that. Just purchased 2 units several months ago, and getting around now to test them. It is frustrating to learn that features you are use to may not operate any longer. I hope this can get corrected, I certainly can not recommend these models or sell them knowing this issue exists.

Thanks Emporium, Hardwiring my unit via cat5 still will not correct the intermitting loss of power back n from Standby. Incidentally I have never had any Buzz unit do this and I have had plenty. This X5 definitely has issues that needs attention. I also am going to try another X5 out of box to see if similar issues arise and forward that info to Buzz. For the time being, I have changed Standby to Power Off, and waiting for box to turn on, load firmware, load software, wait for channels to update, and wait for CEC to turn on TV is really not that bad, but its nice to have a quick picture, instant on without the wait, thats why Buzz has this defaulted in use out of box. RYU, switching to IR from Bluetooth ? That would have nothing to do with dropping the prior WIFI "connected" to "saved" and no connection. Plenty of signal strength, actually more than using the U5, so the X5 disconnects for some reason, lets see what happens with the second X5 unit. Larry

My X5 has similar issues, just purchased and here are the issues. Every so often the unit gets stuck in Standy Mode will not power wake. Have to unplug the power which resets the unit. This happens at least once or twice a week now. Second issue is in Standby, the X5 drops connection from the WiFi. This has been confirmed I can go to WiFi setings and the signal it was "connected" to now says "saved" You have to actually manually connect again. These 2 issues are annoying and after reading these Posts, there may be a firmware issue. This is not a IPTV Server issue. This is not a Router issue because other Buzz U5s work flawless. I used a U5 in this same connection scenerio with no issues for years. Only the X5 has 2 intermitting problems.

Thank You RYU, will give it a try

Does anyone know a way to easily move downloaded or recorded movies from one internal hard drive to another on the U5 models or any Buzz models ? Seems the formatted internal drives can not be moved from one box to another. Is it possible to link the U5 as a Server on internet and send the recordings or downloads to another box ? We need an easy way to do this. I tried a Copy HDD unit where you can install a blank SSD and the removed internal SSD of the Box into this HDD Copy Unit. Files were moved but the Buzz units did not see the files.

Why this remote will not work with Live TV or VOD ? Whats the purpose of the voice search function then ?