bigbro Posted October 20 Posted October 20 (edited) When I change the TV input ,from my BuzzTV X5 to something else like satellite or OTA antenna, then go back to the X5 input , the channel always changes from where I left it. Usually jumps 1-3 channels. Is this a software or hardware problem. It does it on all servers. Edited October 20 by bigbro spelling Quote
dishuser Posted October 20 Posted October 20 is box still on when you switch? if it is your other remote is sending commands to the box 2 Quote
Emporium Posted October 20 Posted October 20 (edited) From another thread in this forum (if you search for "VIZIO".. Quote Mute key on your Vizio remote use the same NEC IR code as our (BUZZ) #9 So if you hit the Mute key on your Vizio remote, you will see a #9 show up on your Buzz box Edited October 20 by Emporium 2 Quote
bigbro Posted October 20 Author Posted October 20 48 minutes ago, Emporium said: From another thread in this forum (if you search for "VIZIO".. So if you hit the Mute key on your Vizio remote, you will see a #9 show up on your Buzz box Yes, that does occur. I found that the "OK" button on my Vizio remote is changing the channel on my BuzzTV receiver. 1 Quote
Emporium Posted October 20 Posted October 20 1 minute ago, bigbro said: Yes, that does occur. I found that the "OK" button on my Vizio remote is changing the channel on my BuzzTV receiver. So that would explain it Vizio is notorious for that. When my mom had hers, it would interfere with the Buzz Box, and even her Electric fireplace. I had to put a cover over the fireplace IR receiver and use the on unit buttons since it was annoying to accidently turn it on. Guess there is not much you can do for this. Just "workarounds" depending on how you use it. Enjoy your experimentation. 2 Quote
bigbro Posted October 20 Author Posted October 20 May have to try programming my old Harmony remote to see if I can alleviate this problem Quote
bigbro Posted October 20 Author Posted October 20 1 minute ago, Emporium said: So that would explain it Vizio is notorious for that. When my mom had hers, it would interfere with the Buzz Box, and even her Electric fireplace. I had to put a cover over the fireplace IR receiver and use the on unit buttons since it was annoying to accidently turn it on. Guess there is not much you can do for this. Just "workarounds" depending on how you use it. Enjoy your experimentation. Yes, while not a major concern, it is somewhat irritating. Just glad it's not a faulty receiver. 1 Quote
bigbro Posted October 20 Author Posted October 20 Just covered the IR sensor on the Buzz box and working fine now. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.