Stuck in Recovery or Boot Fix

[lkscnbdcvn]

yes with the xpl3900, the arq100 air mouse. I might have an xpl3000 somewhere lying around, would i be able to use that mouse somehow?

[nbs.]

I must be wrong about remote not working Otherwise the guide would be wrong

Is this a brand bew set up?

[nbs.]

the 3000 should work You have both batteries installed in the arq?

[lkscnbdcvn]

if i can find that box i'll give it a try..although i'm not sure if the xpl3900 has a built in  receiver for the signal of the remote, and wouldn't I then need to program the remote?

[nbs.]

most remotes do not need the file

 i asked are you setting it up for first time ?

you have two batteries installed

[lkscnbdcvn]

everything has been setup, just having an issue with box booting up, keeps looping on startup screen then freezes. i was forwarded by mygica support to this forum.

[lkscnbdcvn]

batteries are installed in the usb remote, about to look for my xpl3000 to see if i can get a hold of that remote.

[nbs.]

heading out ,good luck

[lkscnbdcvn]

thx.

[lkscnbdcvn]

17 hours ago, nbs. said:

heading out ,good luck

thanks for you help with this, I wasn't aware the buzz remotes were universal, everything worked out perfectly and box is fully functional.