Stugots Posted July 19, 2019 Share Posted July 19, 2019 ATTENTION: This fix ONLY works on 2018 Edition (Android 7) versions of XPL 3000. 1. Download the file onto a computer Then transfer it onto a USB drive or SD card Then insert into box 2. Use reset hole on the back of your 3000 to get into recovery mode on first time boot. You will need to use a Tooth Pick or Paper Clip or something similar to do this. 3. Once in recovery Go to Apply update from ext Select Udisk which is USBDrive or SD Card depending on which one you have the Firmware on 4.Highlight the Firmware Press Ok to install it It will take up to 8 mins to install 5. Once finished Select reboot 6. It will boot back into Android and everything is normal and nothing is erased 1 Link to comment Share on other sites More sharing options...
Guest Sam Posted July 20, 2019 Share Posted July 20, 2019 Does not work getting Failed to verify whole-file signature Link to comment Share on other sites More sharing options...
Stugots Posted July 20, 2019 Author Share Posted July 20, 2019 this method works 100% of the time. please retry all the steps again. is your box XPL 3000 with Android 7? if you get an error message please post a photo of it. thank you Link to comment Share on other sites More sharing options...
Guest Steve Posted July 20, 2019 Share Posted July 20, 2019 Doesn’t work getting messages wrong signature Link to comment Share on other sites More sharing options...
Guest Arun Posted July 21, 2019 Share Posted July 21, 2019 Tried multiple times but invalid signature error image Link to comment Share on other sites More sharing options...
Guest hum Posted July 21, 2019 Share Posted July 21, 2019 I am getting same error message "Failed to verify whole-file signature" and Error code 21. Link to comment Share on other sites More sharing options...
Guest Same message Posted July 21, 2019 Share Posted July 21, 2019 Same message over and over - Failed to verify whole-file signature Link to comment Share on other sites More sharing options...
BigBision Posted July 21, 2019 Share Posted July 21, 2019 (edited) On 7/21/2019 at 1:27 AM, Guest Same message said: Same message over and over - Failed to verify whole-file signature that error 21 means boot system differs. it can crash. you can wipe data clear cache before you factory reset then install the firmware on it. " Not different brand box. " Edited July 23, 2019 by BigBision wrong word in wrong place. Link to comment Share on other sites More sharing options...
Guest Name_ Posted July 21, 2019 Share Posted July 21, 2019 I keep getting error 21. It does not work Link to comment Share on other sites More sharing options...
Guest Steve Posted July 21, 2019 Share Posted July 21, 2019 1 hour ago, BigBision said: that error 21 means you have different brand or different version of the Buzztv model. getting sam error 21, that means my box wont work anytime soon ? or its garbage now ? Link to comment Share on other sites More sharing options...
Guest John Posted July 21, 2019 Share Posted July 21, 2019 What do u mean diff brand even im getting the same error 21 and says signature verification failed Link to comment Share on other sites More sharing options...
Guest Buzztvisgarbage Posted July 21, 2019 Share Posted July 21, 2019 ***comments removed*** Link to comment Share on other sites More sharing options...
Guest arun Posted July 22, 2019 Share Posted July 22, 2019 Any updates on this issue? Stuck with no TV or solution for 4 days. Paid service. Hence it is reasonable to expect a prompt response. Link to comment Share on other sites More sharing options...
Guest Kiran Posted July 22, 2019 Share Posted July 22, 2019 Yes Im also getting the same error and the box is non working condition for last 5 days now. Link to comment Share on other sites More sharing options...
Stugots Posted July 22, 2019 Author Share Posted July 22, 2019 7 hours ago, Guest arun said: Any updates on this issue? Stuck with no TV or solution for 4 days. Paid service. Hence it is reasonable to expect a prompt response. Hello, files were provided promptly. try re-downloading the file here , XPL3900 file is same as XPL3000 however the file could be corrupted when downloading originally. Link to comment Share on other sites More sharing options...
Stugots Posted July 22, 2019 Author Share Posted July 22, 2019 53 minutes ago, Guest Kiran said: Yes Im also getting the same error and the box is non working condition for last 5 days now. try redownloading from this thread. XPL3900 / XPL3000 share same firmware but it sounds like the XPL3000 version is corrupted. Link to comment Share on other sites More sharing options...
Stugots Posted July 22, 2019 Author Share Posted July 22, 2019 On 7/19/2019 at 10:44 PM, Guest Sam said: Does not work getting Failed to verify whole-file signature try re-downloading the firmware here Link to comment Share on other sites More sharing options...
Stugots Posted July 22, 2019 Author Share Posted July 22, 2019 On 7/20/2019 at 9:53 PM, Guest Arun said: Tried multiple times but invalid signature error image try re-downloading the firmware here Link to comment Share on other sites More sharing options...
Stugots Posted July 22, 2019 Author Share Posted July 22, 2019 On 7/21/2019 at 12:29 PM, Guest John said: What do u mean diff brand even im getting the same error 21 and says signature verification failed try re-downloading the firmware here Link to comment Share on other sites More sharing options...
Stugots Posted July 22, 2019 Author Share Posted July 22, 2019 On 7/21/2019 at 12:22 PM, Guest Steve said: getting sam error 21, that means my box wont work anytime soon ? or its garbage now ? try re-downloading the firmware here Link to comment Share on other sites More sharing options...
Stugots Posted July 22, 2019 Author Share Posted July 22, 2019 On 7/21/2019 at 1:27 AM, Guest Same message said: Same message over and over - Failed to verify whole-file signature try re-downloading the firmware here Link to comment Share on other sites More sharing options...
Stugots Posted July 22, 2019 Author Share Posted July 22, 2019 On 7/21/2019 at 12:05 AM, Guest hum said: I am getting same error message "Failed to verify whole-file signature" and Error code 21. try re-downloading the firmware here Link to comment Share on other sites More sharing options...
Stugots Posted July 22, 2019 Author Share Posted July 22, 2019 On 7/20/2019 at 7:03 PM, Guest Steve said: Doesn’t work getting messages wrong signature try re-downloading the firmware here Link to comment Share on other sites More sharing options...
Stugots Posted July 22, 2019 Author Share Posted July 22, 2019 On 7/21/2019 at 12:06 PM, Guest Name_ said: I keep getting error 21. It does not work try re-downloading the firmware here Link to comment Share on other sites More sharing options...
demondirtydemon Posted July 23, 2019 Share Posted July 23, 2019 same here error 21 Link to comment Share on other sites More sharing options...
Recommended Posts